User guide

Quick Hookup TalkAnytime Quick Start Instructions
28
Client Computer Requirements
To make an incoming call using TalkAnytime, the computer must meet the requirements described in the
table below.
Category Requirement
Operating System Windows 98 or Windows XP
Browser Internet Explorer 5.0 or higher
Audio Hardware Microphone & Speaker (in any form)
O.S. Settings Headset or microphone/speaker combo
must be activated and not pre-empted by
any other audio hardware or software.
Browser Settings Popup Blocking must be disabled for the
IP address of the TalkAnytime unit.
(Popup Blocking need not be disabled
globally.)
Activex controls must be enabled.
In terms of audio hardware, many combinations are possible. In any event, the computer must have both a
microphone and an audio output device and they must be activated. A headset that includes both a
microphone and a speaker (connected to the appropriate jacks on the computer’s sound card) would meet
this requirement. The computer might have a built-in microphone and built-in or extension speakers and
such a combination would also meet this requirement.
End-User Information
This chapter documents three ways in which the TalkAnytime unit could make toll-free calling available for
end-users. On the Product CD, we present descriptions of these three applications in separate, single-page
files to explain these applications to end-users. We intend that these files be made available by hyper-link
from the web page at which end-users will access TalkAnytime. The files are listed below.
TalkAnytime Client Pool-Call Primer
TalkAnytime Client Specific-Extension Primer
TalkAnytime Client Dial-Thru Primer