User guide

Gathering Phone/IP Details TalkAnytime Quick Start Instructions
26
Config Info CheckList
Type of Config Info Gathered TalkAnytime
Configuration screen
on which to enter
Config Info
√
IP info for TalkAnytime unit
● IP address
● Gateway
● DNS IP (if used)
● 802.1p Prioritization (if used)
Ethernet/IP Parameters
Frame Format
(Choices: ESF, D4, F4, SLC96)
T1/E1/ISDN Parameters
(TA2410 only)
Frame Format
(Choices: Double Frame, Multi-Frame w/
CRC4, Multi-Frame w/ CRC4 Modified)
T1/E1/ISDN Parameters
(TA3010 only)
CAS Protocol
(Choices: FXS Loop Start, E&M Wink,
E&M Wink w/ Dial Tone, FXO Ground
Start, FXO Loop Start, FXS Ground Start,
E&M Immediate, MFR2-China, Clear
Channel)
T1/E1/ISDN Parameters
ISDN-PRI Protocol
(only if ISDN-PRI is used)
(Choices: Network, Terminal)
T1/E1/ISDN Parameters
Clocking
(Choices: Internal, External)
T1/E1/ISDN Parameters
Line Coding
(Choices: AMI, B8ZS)
T1/E1/ISDN Parameters
Pulse Shape Level
(Choices: 0 – 40 m)
T1/E1/ISDN Parameters
Country Code Regional Parameters
Email address for voip
(optional)
SMTP Parameters
Reminder: Be sure to Save Setup after entering configuration values.