User guide

TalkAnytime User Guide Operation & Maintenance
167
TalkAnytime Program Menu (cont’d)
Menu Selection Description
Download Factory Defaults
Select this to return the configuration parameters to the original
factory values.
Download CAS Protocol
The CAS protocol code allows the digital TalkAnytime to interact properly
with the PBX or central-office switch that it serves. The need to download
CAS protocols arises for only a small minority of TalkAnytime administrators,
and only when PBX/switch is found to be incompatible with standard
protocols.
Download Firmware
Select this to download new versions of firmware as enhancements
become available.
Download User Defaults
To be used after a full set of parameter values, values specified by the
user, have been saved (using Save Setup). This command loads the
saved user defaults into the TalkAnytime.
Set Password
Select this to create a password for access to the TalkAnytime software
programs (Program group commands, Windows GUI, web browser
GUI, & FTP server). Only the FTP Server function requires a password
for access. The FTP Server function also requires that a username be
established along with the password.
Uninstall
Select this to uninstall the TalkAnytime software (most, but not all
components are removed from computer when this command is
invoked).
Upgrade Software
Loads firmware (including H.323 stack) and settings from the
controller PC to the TalkAnytime unit. User can choose whether to
load Factory Default Settings or Current Configuration settings.