User guide

Operation and Maintenance TalkAnytime User Guide
152
Logs Screen Details: Field Definitions (cont’d)
Field Name Values Description
Log # column 1 or higher All calls are assigned an event number in chronological order, with the most
recent call having the highest event number.
Start Date,Time
column
dd:mm:yyyy
hh:mm:ss
The starting time of the call (event). The date is presented as a day expression of one
or two digits, a month expression of one or two digits, and a four-digit year. This is
followed by a time-of-day expression presented as a two-digit hour, a two-digit
minute, and a two-digit seconds value. (statistics, logs) field
Duration column hh:mm:ss
This describes how long the call (event) lasted in hours, minutes, and seconds.
Type H.323, SIP, or SPP Indicates the Call Signaling protocol used for the call (H.323, SIP, or SPP).
Status column success or
failure
Displays the status of the call, i.e., whether the call was completed successfully or not.
IP Direction incoming,
outgoing
Indicates whether the call is "incoming" or "outgoing" with respect to the gateway.
Mode column voice or FAX Indicates whether the (event) being described was a voice call or a FAX call.
From column gateway name Displays the name of the voice gateway that originates the call.
To column gateway name Displays the name of the voice gateway that completes the call.
Special Buttons
Previous -- Displays log entry before currently selected one.
Next -- Displays log entry after currently selected one.
First -- Displays first log entry
Last -- Displays last log entry.
Delete File -- Deletes selected log file.
Call Details
Voice coder G.723, G.729,
G.711, etc.
The voice coder being used on this call.
Disconnect
Reason
Values are
"Normal" and
"Local"
disconnection.
Indicates whether the call was disconnected simply because the desired
conversation was done or some other irregular cause occasioned
disconnection (e.g., a technical error or failure).
DTMF Capability inband,
out of band
Expressions
differ slightly
for different
Call Signaling
protocols
(H.323, SIP, or
SPP).
Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band." The
corresponding field values differ for the 3 different voip protocols.
For H.323, this field can display "Out of Band" or "Inband". For SIP it can display
either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-band
condition or "Inband" to indicate the in-band condition. For SPP it can display "Out of
Band RFC2833" or "Inband".
Outbound Digits
Received
0-9, #, * The digits, sent by TalkAnytime to PBX/telco, that were acknowledged as
having been received by the remote voip gateway.
Outbound Digits
Sent
0-9, #, * The digits transmitted by the TalkAnytime to the PBX/telco for this call.
Server Details -- This field is not applicable to TalkAnytime.
Packets sent integer value The number of data packets sent over the IP network in the course of this
call.
Packets received integer value The number of data packets received over the IP network in the course of
this call.
Packets loss
(lost)
integer value The number of voice packets from this call that were lost after being received from
the IP network.
Bytes sent integer value
The number of bytes of data sent over the IP network in the course of this call.
Bytes received integer value The number of bytes of data received over the IP network in the course of
this call.