User guide

TalkAnytime User Guide Operation & Maintenance
149
Call Progress Details: Field Definitions
Field Name Values Description
Channel 1-n Number of data channel or time slot on which the call is carried.
This is the channel for which call-progress details are being
viewed.
Call Details
Duration Hours: Minutes:
Seconds
The length of the call in hours, minutes, and seconds (hh:mm:ss).
Mode Voice or FAX
Indicates whether the call being described was a voice call or a
FAX call.
Voice Coder G.723, G.729,
G.711, etc.
The voice coder being used on this call.
IP Call Type H.323, SIP, or SPP Unlike the MultiVOIP products to which the TalkAnytime is
related, TalkAnytime units use a proprietary call signaling protocol
rather than any of the standard or Multi-Tech specific protocols
(H.323, SIP, or SPP).
IP Call Direction incoming,
outgoing
Indicates whether the call in question is an incoming call or an
outgoing call.
Packet Details
Packets Sent integer value The number of data packets sent over the IP network in the course
of this call.
Packets Rcvd integer value The number of data packets received over the IP network in the
course of this call.
Bytes Sent integer value The number of bytes of data sent over the IP network in the course
of this call.
Bytes Rcvd integer value The number of bytes of data received over the IP network in the
course of this call.
Packets Lost integer value The number of voice packets from this call that were lost after
being received from the IP network.
From – To Details
Gateway Name
(from)
alphanumeric
string
Identifier for the VOIP gateway that handled the origination of this
call.
IP Address (from) x.x.x.x,
where x has a
range of 0 to 255
IP address from which the call was received.
Options SC, FEC Displays VOIP transmission options in use on the current call.
These may include Forward Error Correction or Silence
Compression.
Gateway Name
(to)
alphanumeric
string
Identifier for the VOIP gateway that handled the completion of this
call.
IP Address (to) x.x.x.x,
where x has a
range of 0 to 255
IP address to which the call was sent.
Options SC, FEC Displays VOIP transmission options in use on the current call.
These may include Forward Error Correction or Silence
Compression.