User guide

Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 51
Administration > Intruder Detection
User-Defined Network Intrusion Detection Rules
Src IP Address
This selection allows you to choose the network from which the information packet must be sent
for the rule to match. Network groups can also be selected. The ANY option matches all IP
addresses; it does not matter whether they are officially assigned addresses or private
addresses. These Networks or groups must be predefined in the Networks menu.
Destination IP Address
This selection allows you to choose the network to which the information packet must be sent
for the rule to match. Network groups can also be selected. These network clients or groups
must have been previously defined in the Networks menu.
Service
This selection allows you to choose the corresponding service. The service must have been
previously defined in the Services menu.
Add
After the rules are defined/selected, click the Add button. The commands can be deleted by
clicking Delete under the Command option.