User guide

Chapter 4 – Configuration Examples
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 29
Example 1, Side B
VPN Setup (Continued)
The Add an IKE Connection screen displays. All settings can be left at the default unless otherwise
indicated:
1. Connection Name: Enter in the name of the VPN tunnel you want to create. Example: Test-
Tunnel.
2. Secret: Enter the Secret password (which has to match on both ends of the tunnel). For this
example, enter test.
3. Select Encryption: Select 3DES.
4. Local WAN IP: Select WAN
5. Local LAN: Select LAN
6. Remote Gateway IP: Select Remote-WAN (Select Any if unknown)
7. Remote LAN: Select Remote-LAN.
8. Click the Save button to save your tunnel.
The VPN > IPSec Status screen displays; this time showing the newly-created VPN tunnel.
Important Note:
Make sure to check the Status box for this VPN tunnel in order to activate it.