User guide

Chapter 4 – Configuration Examples
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 24
Chapter 4 – Configuration Examples
These examples show how to configure the RouteFinder using the entire Web Management software program.
The Wizard Setup utility provides a basic firewall connection, while the Web Management software allows you to
configure VPN features, management features, and other options (see the menu outline in Chapter 2).
Example 1 – Setup Two RouteFinders
The example can be used for a LAN-to-LAN (branch office) setup. It requires two RouteFinders - one in the
home office and one in the remote branch office and requires additional parameters beyond the Wizard Setup to
be entered.
Side A Side B
RouteFinder Setup – Side A
Networks & Services > Networks Setup
1. Log in to your RouteFinder software and go to Networks & Services > Network Configuration
screen.
2. Click the Add button to open the fields for entering your network information.
3. Create a new network name for the Remote WAN by entering a Name, IP Address, and
Subnet Mask. For this example, enter the following:
Name: Remote-WAN
IP Address: 65.126.90.248
Subnet Mask: 255.255.255.255
4. Create a new network name for the Remote LAN by entering a Name, IP Address, and Subnet
Mask. For this example, enter the following:
Name: Remote-LAN
IP Address: 192.168.25.0
Subnet Mask: 255.255.255.0
5. Click Add to add the network to the list.