User guide

Chapter 9 – Troubleshooting
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 148
9. Observe the RouteFinder front panel LEDs. Verify that the LAN, WAN, and/or DMZ LEDs indicate proper
RouteFinder operation in terms of the Ethernet LINK integrity, transmit/receive activity (ACT LED), and
speed (100 MB /10 MB). Refer to the front panel LEDs description in Chapter 1 of this manual.
10. For problems with RouteFinder filter rules, run Statistics & Logs > Packet Filter > Filter Livelog to view
the RouteFinder's defined filter rules, system-generated filter rules, and filter violations.
The Filter LiveLog supervises the packet filter and NAT rules. The Packet Filter log shows the packets that
have not successfully passed the rule set of the packet filter. Click Open Packet Filter LiveLog; a window
opens with the rule violations listed in order of occurrence.
Note: Packets dropped by the Drop setting in Packet Filters > Packet Filter Rules do not appear in the
Packet Filter Livelog.
11. Attach a monitor and keyboard to the RouteFinder for monitoring and debugging (refer to Chapter 5 of this
manual for keyboard and monitor connection information).
12. Run the applicable Statistics & Logs function for the RouteFinder's status and performance.