User guide

Chapter 6 – RouteFinder Software
Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 122
VPN > IPSec Bridging
IPSec Bridging
Check the box to enable IPSec Bridging. If enable IPSec Bridging, then this machine is going to act as a
hub. Upon enabling IPSec Bridging, you will be given options to select the pairs of tunnels for which
bridging is to be setup. See example above.
Bridge Endpoint Setup
Configure a tunnel and two networks by selecting the From network, the To network, and the Through
tunnel. If any packet has a specified source and destination network, the packet will be sent encrypted
via the tunnel.
Note: Packets are sent via the tunnels only if the tunnels are up and running.