User guide

Chapter 3 – Configuration Using Web Management Software
Multi-Tech Systems, Inc. RouteFinder RF850/860 Quick Start Guide (82100051L) 17
Example 1 –Two RouteFinders – Side A
Step 3 – VPN Setup (Continued)
The Add IKE Connection screen displays. All settings can be left at the default unless otherwise
indicated:
1. Connection Name: Enter in the name of the VPN tunnel you want to create.
Example: Test-Tunnel
2. Secret: Enter a Secret password (which has to match on both ends of the tunnel). For this
example, enter test.
3. Select Encryption: Select 3DES.
4. Local WAN IP: Select WAN.
5. Local LAN: Select LAN.
6. Remote Gateway IP: Select Remote-WAN. (select ANY if unknown)
7. Remote LAN: Select Remote-LAN.
8. Click the Save button to save your tunnel.
The VPN > IPSec Status screen displays; this time showing the newly-created VPN tunnel.
Important Note:
Make sure to check the Status box for this VPN tunnel in order to activate it.