User guide

Chapter 1 – Introduction and Description
Multi-Tech Systems, Inc. RF820/RF820-AP & RF830/RF830-AP Quick Start Guide 7
RF820 Back Panel
RF820-AP Back Panel
RF830 Back Panel
RF830-AP Back Panel
Connector Description
Antenna Connector
Connector for the 2.4 GHz 5dBi SWI-Reverse-F antenna. The
antenna must be connected before the RouteFinder is operational.
WAN
WAN (10/100BaseT) port connects the DSL modem or cable modem.
The RF820s have one WAN port; the RF830s have two WAN ports.
LAN Ports
There are 4 LAN ports. You can connect to PCs, FTP servers,
printers, or other devices you want to put on your network.
Reset
The Reset button resets the RouteFinder to its factory defaults. Press
and hold the button until the Status LED goes off (at least 8 to 10
seconds), and then release it. Do not press this button unless you
want to restore all settings to the factory defaults.
Serial
(RF820s only) Serial port connects to a standard modem (optional).
12VDC Power
The power port connects the AC power adapter.