User guide

Chapter 2 – Installation

14 Multi-Tech Systems, Inc. RF820/RF820-AP & RF830/RF830-AP Quick Start Guide

Open a Web Browser

Note: Be sure that the RouteFinder is cabled and that the power is connected. See the

cabling drawings at the beginning of this chapter.

Bring up a Web browser on the PC.

• Type the default gateway address line:

http://192.168.2.1

• Press Enter.

Note: Make sure your PC’s address is on the same network as the router’s address.

IPCONFIG is a tool for finding out a PC’s IP configuration (the default gateway and

the MAC address).

The Login screen for the RouteFinder software displays.

• Type admin (admin is the default user name) in the user name box.

• Type admin in the password box.

• Click Login.

Note: The User name and Password entries are case-sensitive (both must be

typed in lower-case). The password can be up to 12 characters. Later, you will

want to change the password from the default (admin) to something else (see

the User Guide). If Windows displays the AutoComplete screen, you may want

to click No to tell Windows OS to not remember the password for security

reasons.

Password Caution: Use a safe password! Your first name spelled backwards is

not a sufficiently safe password; a password such as xfT35$4 is better. It is

recommended that you change the default password. Create your own

password.