User guide

Chapter 2 – Installation
Multi-Tech Systems, Inc. RF820/RF820-AP & RF830/RF830-AP Quick Start Guide 13
4. The Local Area Connection
Properties dialog box displays.
• Select Internet Protocol
[TCP/IP].
• Click the Properties button.
5. Once you click the Properties button, the
following screen displays. To have your
DCHP client obtain a dynamic IP address,
click the button for Obtain an IP address
automatically.
6. Close out of the Control Panel.
7. Repeat these steps for each PC on your network.
To Set a Fixed IP Address
To set a Fixed IP Address, check Specify an IP address instead of Obtain an IP
address automatically. Then click OK.
1. Enter the workstation IP address as 192.168.2.x. Note that the x in the address
stands for numbers 101 and up.
2. Enter the Subnet mask as 255.255.255.0
3. Enter the Default gateway as 192.168.2.1
4. Close out of the Control Panel.
5. Repeat these steps for each PC on your network.