Specifications

17
since the same keys must be entered into each node on the
wireless network.
Key 1 – Key 4
These can be used to manually enter the keys. This may be
necessary if you want this node to match keys in a different
vendor’s product. These also display the keys when they are
generated using a pass-phrase.
Default Tx Key
Click to update the driver with the four keys displayed in Key1
through Key4. The keys are also written to the registry for
permanent storage. For 128-bit encryption, this button will be
invisible.
Apply
Click to update the driver with the four keys displayed. The keys
are also written to the registry for permanent storage. Click to clear
all the bytes in the four keys. This is useful when starting over
during manual entry.