User guide

Chapter 2 – Installation
8 Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L)
Chapter 2 – Installation
Installation – Planning the Network
Before you begin the installation process, you should plan your network and decide which computer is to have access to
which services. This simplifies configuration and saves you a lot of time that you would otherwise need for corrections and
adjustments.
RouteFinder VPN Connection between Your Internal Network and the External Network
Establishing an Address Table
Enter your configuration information into the appropriate field of the Address Table below. You can use this table to keep
track of your specific RouteFinder VPN and network information (e.g., the IP address used, email lists, etc.) and keep for
future reference.
IP Address Net Mask Default Gateway
Network Card connected to the
internal network (LAN on eth0) ___.___.___.___ ___.___.___.___
Network Card connected to the
external network (WAN on eth1) ___.___.___.___ ___.___.___.___ ___.___.___.___
Network Card connected to the
DMZ (eth2)
___.___.___.___ ___.___.___.___