User guide

Chapter 4 – Configuration Examples
Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) 19
Set Packet Filters
Site A Configuration: RouteFinder VPN in the Home Office
Establish remote access filtering: click on Packet Filters > Packet Filter Rules.
1. For the Remote LAN at the branch office to access the RouteFinder’s LAN, select the following parameters for the
Remote LAN rule:
RemoteLAN – Any – Any – Accept
Note: The rule LAN – Any – Any – Accept, which displays at the bottom of the screen, was created when you
performed your initial setup using the Setup Wizard.
The rule entered in the Setup 1 lan ANY ANY ACCEPT Edit|Delete|Move
Wizard displays in this table
View Rules
by clicking
the Show
button.
Set
Parameters
here