User guide

Chapter 6 – Managing the RouteFinder Using a Web Browser
Multi-Tech Systems, Inc. RF560VPN User Guide 40
Device Status
Click the Device Status button. The Device Status screen displays.
Use the Device Status screen to view the status of the current connections. This screen shows the
status of the Cable/xDSL modem, the Modem Dialup, and the Device IP addresses. You can view the
status of other items by clicking the buttons on left side of the screen.
Device Status Screen (Information Displayed on Left Side of Screen)
· WAN Ethernet – This test describes the current connection status of the Cable/xDSL Modem. For
example, when Cable/xDSL is connected, the screen displays a message Cable/xDSL: Active.
· Release and Renew Buttons - Click the Release button to terminate the WAN connection. Click
the Renew button to establish the WAN connection.
· Modem Dialup – A modem can be used as a dialup backup for the Cable/xDSL modem. If the
modem is the current connection, a message displays: Modem: Active. Otherwise, a message
Not Active displays.
· Hang Up and Dial Up Buttons – Click the Hang Up button to force the modem to break its
connection. Click the Dial Up button to force the modem to dial out.