User guide

Chapter 5 – Configuring the RouteFinder Using a Web Browser
Multi-Tech Systems, Inc. RF560VPN User Guide 31
– VPN Settings
Use this screen to input your LAN-to-LAN VPN settings and/or your Client-to-LAN VPN settings.
VPN Settings for IPSec
If you select Setup IPSEC Settings, the following screen displays:
· Check the Enable IPSec Function checkbox.
· In the Connection Name field, type a name that describes a connection you would like to
establish.
Example: Site A.
· Click the Add button. The VPN Settings detail screen will display. Once you have entered the
settings, the Connection Name displays on the lower half of the screen (see screen above).
· Click the checkbox if you want to Disable Internet Access (VPN Tunnel Only).
· You can then edit, delete, or enable/disable this connection by clicking the corresponding
buttons.
· To enable this connection, check the Enable column next to the connection name.
Note: If you uncheck the Enable box, the connection will not be active, but the parameters will
remain on the screen for you to enable, edit, or delete as desired.