User guide

Chapter 3 – Configuring the PC
Multi-Tech Systems, Inc. RF560VPN User Guide 18
3. The Local Area Connection Properties dialog box displays.
· Select Internet Protocol [TCP/IP]. Once the protocol is selected, the name of your
adapter card should display in the Connect using box.
· Click the Properties button.
4. The Internet Protocol (TCP/IP) Properties dialog box displays. Set your workstation’s IP
Address.
· To set a Dynamic IP Address, check Obtain an IP Address Automatically.
· To set a Fixed IP Address, check Specify an IP address. Fixed Addresses are used in all
the examples, except the two mentioned above. For our example, set the address to
192.168.2.x.
5. Click OK.
6. Close out of the Control Panel.
7. Repeat these steps for each PC on your network.