User guide

Chapter 3 – Configuring the PC
Multi-Tech Systems, Inc. RF560VPN User Guide 13
6. The TCP/IP Properties window displays. Click the IP Address tab to set your workstation’s IP
Address.
7. In the IP Address dialog box, choose one of the following:
· To set a Dynamic IP Address, check Obtain an IP Address Automatically. Dynamic
Addresses are used in the Example Reference Guide in Example 2 – Site B and
Example 3 – Site B.
· To set a Fixed IP Address, check Specify an IP address. Fixed Addresses are used in
the Example Reference Guide in all the examples, except the two mentioned above. For
our example, set the address to 192.168.2.x.
8. Click OK.
9. You have completed the client settings. Click OK to close out of the Network Control Panel.
10. Windows will ask you to restart the PC. Click the Yes button.
Note: Repeat these steps for each PC on your network.