User guide

Chapter 5 – Managing the RouteFinder Using a Web Browser
Multi-Tech Systems, Inc. RF550VPN User Guide 31
Enable Keep Alive
When enabled, will automatically renegotiate
VPN if a tunnel is temporarily interrupted.
Enabled
Remote Site
Choose whether the remote site will be used by a
single user or a LAN
Enable NetBIOS Broadcast
When enabled, will allow Microsoft File and
Printer sharing to communicate information about
computers on the network.
Enabled
Remote IP Network Enter the Remote IP Network address (LAN) for
Site B.
192.168.10.0
Remote IP Netmask
Enter the Remote IP Netmask address for Site B. 255.255.255.0
Remote Gateway IP/FQDN
Enter the Remote Gateway IP address (WAN) for
Site B.
204.26.122.3
Network Interface
Select the Network Interface from the drop-down
list box.
WAN
ETHERNET
If You Select IKE for the Secure Association, the Following Fields Display
Secure Association
Select IKE (the default) to set how inbound packets will be filtered.
IKE primarily encompasses router key exchange and the negotiation
of security policy. Selecting IKE activates the remaining input settings
on this screen.
Perfect Forward Secure
Check the Enabled button.
Encryption Protocol
Select 3DES.
PreShared Key Enter the PreShared Key name. You can
enter an alphanumeric name, but it must
match the security code for the RouteFinder
at site B.
102t3t4f
Key Life
Enter the amount of time that tells the router
to renegotiate the Key
28800 seconds
is 8 hours
IKE Life Time
Enter the amount of time that tells the router
to renegotiate the IKE security association.
3600 seconds
is 60 minutes
Click the Save button. Your defined connections are displayed at the bottom of this screen where you
can edit or delete them.
This concludes the basic configuration of your SOHO RouteFinder. It is a good idea to save the
settings at this time by clicking the Save and Restart button.