User guide

Chapter 5 – Managing the RouteFinder Using a Web Browser
Multi-Tech Systems, Inc. RF550VPN User Guide 29
– VPN Settings
Use this screen to input your LAN-to-LAN VPN settings and/or your Client-to-LAN VPN settings.
1. In the
Connection Name field, type a name that describes a connection you would like to make.
Example:
Site A.
2. Click the Add button, and the VPN Settings detail screen will display (see the next screen). Once
you have entered the settings, the
Connection Name displays on the lower half of the screen
(above).
3. Click the checkbox if you want to Disable Internet Access (VPN Tunnel Only).
4. You can then edit, delete, or enable/disable this connection by clicking the corresponding buttons.
5. To enable this connection, check the Enable box.
Note: If you uncheck the Enable box, the connection will not be active, but the parameters will remain
on the screen for you to enable, edit, or delete as desired.