User guide

Chapter 3 – Configuring the PC
Multi-Tech Systems, Inc. RF550VPN User Guide 18
3. The Local Area Connection Properties dialog box displays.
· Select
Internet Protocol [TCP/IP]. Once the protocol is selected, the name of your adapter
card should display in the
Connect using box.
· Click the
Properties button.
4. The Internet Protocol (TCP/IP) Properties dialog box displays. You will set your workstation’s IP
Address.
· To set a Dynamic IP Address, check Obtain an IP Address Automatically. Dynamic
Addresses are used in Example 2 – Site B and Example 3 – Site B.
· To set a Fixed IP Address, check Specify an IP address. Fixed Addresses are used in all
the examples, except the two mentioned above. For our example, set the address to
192.168.2.x.
Click
OK.
5. Close out of the Control Panel.
6. Repeat these steps for each PC on your network.