User guide

Chapter 3 – Configuring the PC
Multi-Tech Systems, Inc. RF550VPN User Guide 16
7. Next, select the Protocol tab to set your workstation’s IP Address.
8. Click the Properties button and choose one of the following:
· To set a Dynamic IP Address, check Obtain an IP Address Automatically. Dynamic Addresses
are used in the Example Reference Guide in
Example 2 – Site B and Example 3 – Site B.
· To set a Fixed IP Address, check
Specify an IP address. Fixed Addresses are used in the
Example Reference Guide in all the examples, except the two mentioned above. For our
example, set the address to
192.168.2.x.
Click
OK.
9. Close out of the Control Panel.
10. Repeat these steps for each PC on your network.