User guide

Configure and Manage Using a Web Browser
23
– WAN Filter Settings
The WAN Filter Settings function allows the network administrator to define
whether remote/outside users have the permission to access the local
network. To activate, check the WAN Side Filter Enabled box. Then define
the policy.
1. To access this screen, click the Filter Settings button on the left side of
the Advanced Settings screen. Then click the WAN Filter Settings.
2. Check the WAN Side Filter Enabled box to begin.
3. Select the WAN side filter: Block or Pass.
4. Select the client filter settings: Block or Pass.
5. Select the protocol to be used from the Protocol drop-down list box.
6. Enter the client IP Address Range and Destination Port Range.
7. Click the Add button. The entry displays on the lower part of the screen.
8. Continue adding table entries. When complete, click the Submit button.