User guide

Configure and Manage Using a Web Browser
21
– Dynamic Routing
Dynamic Routing is disabled when Static Routing is used. You will have to
disable Static Routing in order to choose one of the dynamic routing
protocols. The Dynamic Routing protocol adjusts automatically to the
changes in the network topology or traffic.
1. To access this screen, click the Dynamic Routing button on the left side
of the screen. The
Dynamic Settings screen displays.
2. Click the radio buttons for the
Send and Receive settings desired. To
change these settings before submitting them, simply re-check the
desired ones.
Send – Choose the protocol you want to use to transmit the network
data. The recommended setting is Disable.
Receive – Choose the protocol you want the RF500S to receive network
data. The recommended setting is Disable.
3. Click the Submit button to accept these settings.