User guide

RouteFinder RF500S Quick Start Guide
18
Advanced Settings
Click the Advanced Settings button. The DHCP screen displays.
The
Advanced Settings options will establish DHCP server settings, virtual
server settings, a static routing table, dynamic settings, modem string
settings, administrative settings.
DHCP Server Settings
The DHCP Server is enabled by default. If you would like to disable it,
uncheck the Enable DHCP Server Functions box.
IP Address Pool Range - Assign the range of the IP addresses that will
automatically be assigned to the clients of your network. The default settings
are 192.168.2.2 to 192.168.2.100.
IP Address Reservation - Assign computers on your network the same
static IP address every time the computer is turned on.