User guide

Configure and Manage Using a Web Browser
15
– Modem Settings
A modem can be used as a dialup backup to the Cable/xDSL connection. If
you would like to use a modem backup, enable the modem settings function.
Check the Dialup Modem When Cable/xDSL Is Not Connected box. Then
input the ISP account settings.
Note: If you change the baud rate settings, please check the initial string.
(You can refer to your modem manual or TA.)
– Save and Restart
After you have finished making all the changes on the various pages, click
Save & Restart to save the settings and restart the device. After restarting,
the device will function according to the saved settings.
During the save and restart process, system messages will let you know that
you have successfully configured the settings for the device and saved the
settings.
During the startup process, the LEDs of the device will blink. Please wait
until the blinking of the device stops before proceeding.