User guide

Chapter 7 - LAN Client Settings

Adding TCP/IP (Unix Server Connection):

Windows 95/98/NT:

1. In the Network dialog box, Configuration tab, click Add.

2. Select Protocol and click Add.

3. The Select Network Protocol dialog box is displayed. In the Manufacturers option box [Win95

only], select Microsoft. In the Network Protocols option box, select TCP/IP [Win95/98] or TCP/

IP Protocol [WinNT only].

Note: Windows NT workstation has no Manufacturers option box.

Win95/98 WinNT

4. Click OK (twice) to return to, and then close, the Network dialog box.

Set Up Properties of Components (Unix Server Connection):

Dial-up Adapter:

Windows 95/98:

1. In the Network dialog box, Configuration tab, select the TCP/IP-Dial-up adapter.

2. Click Properties. The TCP/IP Properties dialog box opens with the IP Address tab selected.

3. Verify that Obtain an IP Address Automatically is selected.

4. Click OK to close the TCP/IP Properties dialog box.

Note: You must restart your computers to enable the new settings.