User guide

Chapter 7 - LAN Client Settings

Set Dial-up type (Novell Server Connection):

Windows 95/98:

1. Right-click the newly created connection icon, then click Properties. The My Connection

dialog box opens.

2. On the General tab, click Server Type. The Server Types dialog box opens. Select PPP:

Windows 95, Windows NT 3.5, Internet.

3. Select only the following items: Log on to network, Enable software compression, and TCP/

IP. Do not disturb any other items that are already checked.

Dial in to your network (Novell Server Connection):

Windows 95/98:

1. You are ready to dial in to your network.

2. Double-click the new connection icon. The Connect To dialog box opens.

3. Enter the user name (if necessary) and password configured for you on the RF102S.

Note: If your particular situation permits, select Save password.

4. Click Connect.

5. After connecting to the RF102S, you can access the same services and resources as if you were

connected to the network locally.

Accessing a Windows NT Server and a Novell NetWare Server

Note: Before configuring your remote site, ensure TCP/IP has been installed on your NT Server.

Perform the following procedures if your PC workstation needs to access both a Windows NT Server

and a Novel NetWare Server.

Adding the dial-up adapter (Novell/NT Server Connection):

Windows 95/98/NT:

1. Click Start | Settings | Control Panel.

2. Double-click the Network icon to open the Network dialog box.