User guide

56
Chapter 6 - RouteFinder Monitor
RouteFinder Monitor
RouteFinder Monitor is a utility that provides both monitoring and troubleshooting functions.
Running RouteFinder Monitor
1. Double-click the RouteFinder Monitor icon, or select Start | Programs | RouteFinder Manager |
RouteFinder Monitor.
2. The RouteFinder Monitor dialog box displays.
Note: If you receive a message stating “Device is not found”, refer to the Troubleshooting
chapter in this User Guide.
Before using any of the RouteFinder Monitor options, you must select the device you are
attempting to configure from the Available Devices list. If you need to update the list, click
Refresh Device List.
Test Connection
The Test Connection option tests your connection settings and assist you in determining if problems
are due to the modem, the RouteFinder, or an incorrect setting. Test Connection uses the attached
modems to dial-up the remote server (ISP) and establish a connection.
1. From the main RouteMonitor dialog box, click Test Connection to begin testing.
2. The Test Connection dialog box displays.
3. Select Connect Port 1 to test the WAN connection, or Connect Port 2 to test the Async
connection.
4. The monitor display window displays the actions of the test.
6. Click Exit to close the Test Connection dialog box.