User guide

54
Chapter 5 - RouteFinder Manager
3. Enter the location of the new firmware file in the Firmware File Directory box. RouteFinder
Manager automatically detects the new firmware file name and displays it. The version number
of your firmware also displays.
4. Click Upgrade to upgrade your firmware.
5. A message appears stating the upgrade has started.
6. After several minutes, an informational dialog box displays indicating the upgrade was
successful.
7. Click OK.
8. From the main Manager dialog box, click Save and Exit.
9. Click Yes to restart the RouteFinder using the new firmware version.
General Diagnostic
The General Diagnostic option on the main RouteFinder Manager dialog box displays network device
information and allows you to determine if the RF102S is functioning properly.
1. From the main Manager dialog box, click General Diagnostic.
2. The General Diagnostic dialog box displays information about the RF102S.
3. Record the information if necessary and click OK to exit.