User guide

53
Chapter 5 - RouteFinder Manager
Load Settings
The Load Settings option allows you to load either the default settings of your network device or to
load settings previously saved to a file.
1. From the main Manager dialog box, select the Load Settings option.
2. The Load Settings dialog box displays.
3. To return the RouteFinder to factory default settings, select Load Default Setting.
4. To load a configuration from a file, select Load Settings From File.
5. In the File Path box, enter the full path to the file containing the settings you would like to use or
click then navigate to and select the file.
6. Click OK to load and apply the settings to the RouteFinder.
Upgrade Firmware
Warning: Upgrade the firmware of your RouteFinder RF102S only under the advice and direction of
the Multi-Tech Technical Support Group. Improperly upgrading the RF102S may disable the device!
The Upgrade Firmware options allow you to upgrade your RF102S firmware. The Upgrade Firmware
option upgrades the firmware of your RF102S, not the RouteFinder Manager or Monitor software.
1. From the main Manager dialog box, click Upgrade Firmware.
2. The Upgrade Firmware dialog box displays.
To Upgrade your firmware:
1. Download the latest firmware from the Multi-Tech System’s web site at www.multitech.com.
2. Copy the firmware to the directory containing the RouteFinder Manager program files. Refer to
the default Firmware File Directory box to determine the location of the files on your system.