User guide

52
Chapter 5 - RouteFinder Manager
Device Name
The name of your network device displays. To change the name, simply enter a new name. If
you are connecting to an ISP via modem or ISDN TA, and your ISP requires you to enter a
computer name, you may use the device name that you’ve entered on this screen.
Domain Name
Enter your local network domain name.
Device Password
The RouteFinder manager does not come with a password enabled. If you choose to provide the
device with a password, you will be prompted to enter the password each time you want to
configure your network device. To enter a Password, type your password in the Device
Password box, then re-enter your password in the Password Verification box.
Note: If you choose to use a password, ensure you have selected something that will be easy to
remember or write it down and store it in a safe location. If you have completely forgotten your
password, contact the Multi-Tech Technical Support group for assistance. Refer to Chapter 10 in
this User Guide for more information about our Technical Support services.
2. Click OK.
Save Settings to File
The Save Settings to File option allows you to save your settings to a file. This option provides a
method for backing up your system configuration so that it can be used in the event your settings
become accidently deleted. This option can also be used if you would like to have more than one set
of settings for your RouteFinder.
1. From the main Manager dialog box, click Save Settings to File.
2. The Save Settings to File dialog box displays.
To save your settings to a file:
1. In the File Path box, enter the full path to the file containing the settings you would like to use or
click then navigate to and select the file. You cansave a copy of the file to a different
location by changing the path.
2. Press OK to save the settings to the file name specified in step 1.