User guide

51
Chapter 5 - RouteFinder Manager
LAN Local Client List
In the Privileged Client Table, enter the clients you wish to have privileged access to the services
that you have selected in the Filter Settings dialog box. The filter uses MAC addresses to
identify the privileged clients. You can enter the MAC address directly or you can use the MAC
address search tool by entering the IP address of the computer, then click Search to find the
MAC address. After completing the IP Address and MAC (Node) address, click Add to include
the information in the Node (MAC) address list.
Remote Clients (Applies to Remote Access Ports)
Select Include WAN Async Clients as Privileged Clients or Include WAN Ethernet Clients as
privileged clients to filter Remote Clients by the port they are coming in through.
8. Click OK when complete.
Refresh Device List
1. From the main Manager dialog box, click Refresh Device List to search the LAN for available
network devices and display them in the Available Devices list.
Note: If a device does not appear in the list, click Refresh Device List again to determine if the
device will appear on the list. If the device still does not appear, ensure that all cables are
correctly connected and that the RF102S is powered on. If the device still does not appear in the
list, refer to the Troubleshooing chapter of this User Guide.
Device Name and Password
1. From the main Manager dialog box, click Device Name and Password. You may use the
default device name or use this dialog box to change the name or add a password for your
device.