User guide

50
Chapter 5 - RouteFinder Manager
Enable Client Filter Settings
The Client Filter allows you to decide which services are allowed into your network and which clients
are authorized to access them.
1. From the Filter Settings dialog box, select Enable Client Filter Settings.
2. Click Client Filter Settings.
3. The Filter Settings dialog box displays.
The filter works by filtering TCP/IP port numbers. The 5 most commonly used port numbers are
listed for you. They include the port numbers for Mail, WWW, FTP, Telnet, and News. If you
would like to filter other services, you must know the port number for the service.
4. Click Edit to enter new service port numbers.
5. Enter the TCP/UDP Port Number and click Add.
6. Click Privileged Clients.
7. The Privileged Client Table dialog box displays.