User guide

47
Chapter 5 - RouteFinder Manager
Filter Settings
You can use Filter Settings to choose which packets are allowed to enter the network and which
packets will be blocked. Filter Settings can be used to filter network services such as Mail, WWW,
FTP, Telnet and News.
1. From the main Manager dialog box, select your RF102S, then Filter Settings.
2. The Filter Settings dialog box displays.
3. Select the Block tab or the Pass tab to define your filtering.
• The Block function filters by blocking packets from going out the WAN port or coming in through
the LAN port. To enable the Block IP filter function, select the Enable Block IP Filter Function
check box.
• The Pass function filters by defining which packets can go into your WAN port or come on to
your LAN. To enable the Pass IP filter function, click the Pass tab and select the Enable Pass IP
Filter Function check box.