User guide

44
Chapter 5 - RouteFinder Manager
If you select the Use ML-PPP option, select one of the following:
Bandwidth on Demand
When traffic becomes heavy, this option looks for other routes to relieve the load, such as another
connection to an ISP (without ML-PPP).
Dial-up a new port after number of clients equals
The network device dials a new port when the number of users exceeds the number entered.
Always direct clients to the fastest port available
The network device determines which port is least busy and directs clients to that port.
LAN DHCP Server
Refer to the Glossary at the back of this User Guide for more information about the DHCP function.
1. From the main Manager dialog box, click LAN DHCP Server.
Note: The LAN DHCP Server option indicates if DHCP is enabled or disabled. The DHCP
function is Enabled by default. To Disable the function, you must open the DHCP Configuration
dialog box, select Disabled and click OK.
2. The DHCP Configuration dialog box displays.