User guide

33
Chapter 5 - RouteFinder Manager
3. The IP Routing Settings dialog box displays.
IP Routing (NAT Enabled)
If NAT is enabled, all local users will be firewall protected and will share one IP address through
the Async port. Enter the information as described:
Tel Number
Enter the phone number required to access your ISP.
User Name
Enter the account user name to be authenticated by your ISP.
Password
Enter the user account password to be authenticated by your ISP.
Password Verification
Re-enter the user account password for verification.
External (Port) IP
Enter the fixed IP address provided by the remote site System Administrator. If this address is
automatically assigned by the remote site DHCP server, enter 0.0.0.0
Assign Remote Site an IP Address
If you will specify the IP Address of the remote site, select this check box.
Remote IP address
Enter the IP address the remote site will use.
Allow Remote Dial-In
This option allows a remote site to dial-in to this network.
1. From the IP Routing Settings dialog box, select Allow Remote Dial-In.
2. Click Remote Authentication Settings.