User guide

Chapter 4 - Telnet

Edit User Database

To add users to the database, select the next available letter. Enter the User Name, Password, and

Callback type for each user that you add to the database. You can enter up to 64 remote clients.

Idle Timeout

You can set the number of minutes you want to allow a connection to stay idle before disconnection.

The default idle timeout for Remote Access is 0 minutes.

Serial Baudrate

Select one of the available options. You may need to use a slower speed to ensure a quality

connection.

Modem Pre-initial string

Refer to your modem or ISDN TA User Guide for information. The default value will work for most

analog modems.

Modem Initial string

Refer to your modem or ISDN TA User Guide for information.

Modem Dialup string

Refer to your modem or ISDN TA User Guide for information.

Modem Hangup string

Refer to your modem or ISDN TA User Guide for information.

Edit login script

Select this option to edit the login script executed when the client connects to the network. Refer to

the RouteFinder Manager chapter of this User Guide for additional information about creating and

editing scripts.

RADIUS Server

Select Enable to configure remote users to authenticate on a RADIUS Server.

RADIUS Access Server IP

Enter the IP address of the RADIUS Access server.

RADIUS Accounting Server IP

Enter the IP address of the RADIUS Accounting server. In most configurations, the Access and

Accounting server are located on the same machine, so the IP address is the same for both fields.

RADIUS Secret

Enter the secret code or password for the RADIUS Server.

Router DNS IP Address

Enter the IP address of your Internet Service Providers DNS server.

DHCP Server

Select Disable or Enable. If you would like the RF102S DHCP server function to provide IP

information to workstations as they connect to the network, select Enable. When you enable DHCP,

you will be prompted to provide the beginning and ending IP addresses in the range of addresses

administered by your RouteFinder. Refer to the LAN DHCP section of the RouteFinder Manager

chapter of this User Guide for additional information.

Virtual Server

Select Disable or Enable. If you select Enable, you may enter the external and internal IP

Addresses and ports necessary to allow remote clients to access specific devices on your network

via the Internet. Refer to the General Settings section of the RouteManager chapter in this User

Guide for more information about Enabling IP Mapping.