User guide

23
Chapter 3 - Software Installation and Configuration
15. The Note dialog box displays indicating that you have completed the Setup Wizard.
Read the IMPORTANT! information contained in the dialog box. Click Run Monitor (recom-
mended), Run Manager, or Exit.
Testing your Connection
When you select Run Monitor, the RouteFinder Monitor program opens.
1. To test your current settings, select Test Connection. Select Connect Port 1 to test serial port
1. Select Connect Port 2 to test serial port 2. The monitor activity will appear in the display
window. Refer to Chapter 6 for additional information about the monitoring capabilities of the
RF102S.
2. Before using the device, you must configure your workstations for TCP/IP. Refer to Chapter 7 for
configuration information.
Note: If a problem occurs while testing your connection, or you need to configure advanced
options such as filtering, DHCP or routing, use RouteFinder Manager by selecting Programs |
RouteFinder Manager | RouteFinder Manager.