User guide

21
Chapter 3 - Software Installation and Configuration
9. The Setup Wizard: DNS IP Address dialog box displays.
Enter your ISP’s DNS Server IP address. If you are not sure of the IP address, contact your ISP.
Refer to the Glossary in the User Guide for more information about the DNS Server.
Click Next.
10. The Setup Wizard: Modem Settings dialog box displays.
The final step in configuring your RF102S for basic operations is to enter the model and DTE
baudrate of the modem you are using. This is an important setting that determines the DTE
baudrate or speed of communication between the RF102S’s ports and your modem or ISDN TA.
Select your modem and baudrate as described on the following pages.
Note: If you do not have a modem or ISDN TA attached to the RouteFinder ports, use the default
modem values.
11. To select your modem, in the Modem settings box, click . The system loads modem
information.