User guide

20
Chapter 3 - Software Installation and Configuration
Use RADIUS Server
Select this option to authenticate your remote clients on a RADIUS server. Enter the
following RADIUS Server Settings:
• RADIUS Access Server IP Address: Enter the IP address of the RADIUS Access Server.
• RADIUS Accounting Server IP Address: Enter the IP address of the RADIUS Accounting
Server.
• Secret: Enter your shared Secret RADIUS code or password.
• Secret Verification: To confirm your Secret code, re-enter your code or password.
Note: In most cases, the RADIUS Access Server and the RADIUS Accounting Server are the
same server, so the IP address will be the same.
Click Next and continue with Step 9.
IP Routing (NAT Enabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
• Telephone Number: Enter the phone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (such as “9”, or “0”), enter the required
number plus a “w”(wait) or a comma in the Telephone box. For example, 9w555-2323 or
9,,5552323. Each comma provides a 3-4 second delay.
• User Name: Enter the User Name for your remote server or ISP account.
• Password: Enter the Password for your remote server or ISP account.
• Password Verification: Re-enter the password for your remote account.
Click Next.