User guide

QUALITY OF SERVICE

■ SESSION: This option is only available when Connection Sessions is chosen in Service field. The

maximum number of session is 20000.

■ Direction: Select the traffic direction to be applied for this rule.

■ Sharing Method: This option is only available when MAXR, MINR, SESSION are chosen in Control field. If

you want to apply the value of Control setting on each selected host, then you need select “Single”.

■ Schedule: The QoS rule can be turn off according to the schedule you specified. By default, it is always

turned on when the rule is enabled.

If creating rule by MAC address:

■ Grouping: Choose MAC from the list, and followed by a MAC address of selected host.

■ Control: In this field, you will decide what action will be taken on those selected hosts. Set the

corresponding control types for the selected service type.

■ PRI: Set priorities for data packets of selected hosts. The value is from 1 to 6. “1” is with highest

priority, and “6” is with least priority.

■ MAXR: Indicate the maximum bandwidth for selected hosts. The measurement unit can be Kbps or

Mbps.

■ MINR: Indicate the minimum bandwidth for selected hosts. The measurement unit can be Kbps or