User guide

ADVANCED NETWORK
■ MAC Control: Check to enable MAC Control.
■ Black List/White List: Choose one of the following conditions:
■ Allow all to pass, except those match the specified rules.
■ Deny all to pass, except those match the specified rules.
■ Log Alert: Check to enable Log Alert. This will record events that are blocked by these rules.
■ Known MAC from LAN PC List: All connected clients and their MAC Address are displayed.
■ MAC Address: Enter the MAC address of the local device.
■ Schedule: The rule can be turned off according to a schedule rule.
■ Enable: Check to enable each rule.
Options
■ Stealth Mode: When enabled, the router will not respond to port scans from the WAN, thus making it less
susceptible to discovery and attacks.
■ SPI ("Stateful Packet Inspection" also known as "dynamic packet filtering"): helps to prevent cyber attacks
by tracking more state per session. It validates that the traffic passing through that session conforms to the
protocol.
■ Discard PING from WAN Side: When enabled, this gateway won ’t reply any ICMP request packet from WAN
side.
■ Remote Administrator Host/Port: This feature enables you to perform administration task from a certain
remote host. If this feature is enabled, only the specified IP address can perform remote administration.
MultiConnect
®
rCell 500 Series Router User Guide 33