User guide

LED INDICATORS
LED Indicators
Indicator Label Description
Power Source 1 Continuously ON: Device is powered by source 1.
Power Source 2 Continuously ON: Device is powered by source 2.
Note: If both power source 1 and 2 are connected, the
device will choose power source 1 first. In this instance,
the LED for power source 2 will remain OFF.
WLAN (WiFi) WIFI Continuously ON: Wireless radio is enabled.
Flashing: Data packets are being transferred.
OFF: Wireless radio is disabled.
SIM A Continuously ON: SIM A is in use.
SIM B Continuously ON: SIM B is in use.
LAN1 - LAN 4 E1 - E4 Continuously ON: Ethernet connection is established.
Flashing: Data packets are being transferred.
High 4G Signal HIGH Continuously ON: Strong 4G signal strength.
Low 4G Signal LOW Continuously ON: Weak 4G signal strength.
USB USB CELL Continuously ON: USB device is attached.
Serial Port SER. Flashing: Serial data is being transferred.
10 MultiConnect
®
rCell 500 Series Router User Guide