PS9648 Power Supply User Guide
PS9648 Power Supply User Guide P/N 82074300, Revision A Copyright © 1998 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
iv CommPlete Communications Server
Table of Contents 1 Introduction Introduction ...................................................................................................................................................... 2 Description ........................................................................................................................................................ 2 Features..........................................................................................................................................
vi CommPlete Communications Server
1 CommPlete Communications Server Introduction 1
PS9648 Power Supply User Guide Introduction This manual describes the field installation of a Multi-Tech PS9648 power supply into a CommPlete Communications Server CC9648 chassis. Installation and troubleshooting of the PS9648 should be performed only by qualified service personnel. Description The PS9648 is a universal input switching power supply for the CommPlete Communications Server. Two PS9648 power supplies are installed as standard equipment in each CommPlete CC9648 chassis.
1 Introduction Technical Specifications Input voltage 40 to 72 VDC Input current 10 A @ 48 V at full load Output voltage at maximum current 5 VDC @ 65 A 21 VDC @ 0.5 A 5 V regulation ± 1% at full load Indicator LED for power good indication Environmental Temperature range: 0°–40° C (32°–104° F) Humidity range: 0–95% (noncondensing) Dimensions 7.3 cm × 17.1 cm × 29.8 cm (H × W × D) 2.88 in.× 6.75 in.× 11.75 in. (H × W × D) Weight 2.27 kg (4 lb 9 oz.
2 CommPlete Communications Server Installation 5
PS9648 Power Supply User Guide Introduction This chapter describes how to install the PS9648 power supply into a CommPlete Communication Server CC9648 chassis. This equipment should be installed only by a qualified service person. Pre-Installation Notes • All installation must be done by a qualified service person.
3 CommPlete Communications Server Operation 7
PS9648 Power Supply User Guide Introduction This chapter provides information about operating your PS9648 Power Supply after it is installed. Power Switch The PS9648 has a power switch on the front panel that is labeled with the international I (on) and O (off) symbols. For the most reliable operation, both power supplies should be turned on whenever the CommPlete Communications Server is operating. Power Indicator The power indicator lights if all outputs are good.
4 CommPlete Communications Server Solving Problems 9
PS9648 Power Supply User Guide Introduction This chapter provides information needed to identify and fix problems with the PS9648 power supply module. Problems can be observed on the CommPlete system’s front panel LEDs, the control PC’s screen, or via audio alarm or alarm report. In addition, problems can be found when performing the Diagnostic Tests documented elsewhere in the CommPlete Communications Server User Guide.
4 Solving Problems Procedure 1. Turn off the power supply that is not being adjusted. 2. Place your voltmeter’s probes on the test points. 3. Two trimpots, one for each power supply, are located on the back of the chassis between the power supply fans. Adjust the 5 volt trimpot that is closest to the power supply that you are testing to 5.1 VDC by turning it clockwise to increase the voltage, or counterclockwise to decrease the voltage. 4. Check the measurement. 5.
PS9648 Power Supply User Guide Insertion and Removal of a Power Supply Qualified service personnel may insert or remove a power supply without turning off the system. We recommend that you insert the power supply slowly. If the power supply is not replaced, a cover plate must be installed. Safety Disconnect Device The switches on the power supplies are not safety disconnect devices. To reduce the risk of electric shock, unplug the two input power cords from the back of the CC9648.
5 CommPlete Communications Server Warranty, Service, and Technical Support 13
PS9648 Power Supply User Guide Limited Warranty Multi-Tech Systems, Inc. (“MTS”) warrants that this product will be free from defects in material or workmanship for a period of two years from the date of purchase, or, if proof of purchase is not provided, two years from date of shipment. MTS MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
5 Warranty, Service, and Technical Support Technical Support Multi-Tech has an excellent staff of technical support personnel available to help you get the most out of your Multi-Tech product. If you have any questions about the operation of this unit, please call (800) 9722439 (USA and Canada) or (612) 785-3500 (local and international). Please record PS9648 information in the spaces provided below, and have it available when you call.
PS9648 Power Supply User Guide The Multi-Tech BBS Multi-Tech maintains a bulletin board system (BBS) for its customers. Information available from the BBS includes new product information, product upgrade data, and problem-solving tips. There is also a message service that lets you request additional information. The phone number for the Multi-Tech BBS is (800) 392-2432 (USA and Canada) or (612) 785-3702 (local and international).
5 Warranty, Service, and Technical Support Reading a Message When you log on, the BBS will tell you if you have a personal message (mail). At the prompt Would you like to read it now?, type R to read the message. This is the only point at which you can read your mail, since you cannot read any messages from the Message Menu. Leaving a Message The Multi-Tech BBS has no public discussion area. To leave a personal message, select the Message Menu by typing M at the Main Menu.
PS9648 Power Supply User Guide About the Internet Multi-Tech is a commercial provider on the Internet, and we retrieve e-mail messages from the following mailboxes on a periodic basis: tsupport@multitech.com Technical Support mtsmktg@multitech.com Marketing Dept. mtssales@multitech.com Sales Dept. international@multitech.com International Marketing & Sales writers@multitech.com Publications Dept. Multi-Tech's presence includes a Web site at: http://www.multitech.com and an ftp site at: ftp://ftp.
Index —A— adjusting the output, 11 —M— manual organization, 3 Multi-Tech BBS, 16 —B— —O— BBS, Multi-Tech, 16 operating the PS9648, 8 —C— CC9648 chassis, 6 CompuServe, 17 —D— —P— power bus, 2 power cords, 12 power indicator, 6, 8, 10 power switch, 8 description, 2 dimensions of PS9648, 3 —S— —F— fax-back service, 18 features, 2 fuse, 3, 10 safety, 6, 12 service, 14 solving problems, 10 specifications, 3 switchover time, 2, 8 —T— —I— installation, 6 Internet, 2, 18 —L— technical specifications,
PS9648 Power Supply User Guide 20 CommPlete Communications Server
