Quick Start Guide
MultiVOIP Gatekeeper MultiVOIP Gatekeeper Quick Start Guide Model MVPGK1 P/N 82099221 Revision B Copyright © 2001 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Quick Start Guide Contents 1 Installation Introduction ....................................................................................... Overview ........................................................................................... Unpacking ......................................................................................... Safety Warnings ................................................................................ Mounting the Gatekeeper in a Rack ....................................
MultiVOIP Gatekeeper iv
Quick Start Guide 1 Installation Introduction The Multi-Tech MultiVOIP™ Gatekeeper, Model MVPGK1, is a turnkey hardware and software solution that enables network managers and intranet managers to define and control how H.323 voice traffic is managed over IP networks. This Quick Start Guide will show you how to set it up, and introduce you to the main features of the Gatekeeper software. Overview This chapter explains how to install and cable the Gatekeeper. The Windows NT Server 4.
MultiVOIP Gatekeeper • A system CD containing the Gatekeeper software, NIC drivers, and hardware and software user guides • An overnight contract If any of these items are missing, please contact Multi-Tech Systems or your dealer/distributor.
Quick Start Guide Mounting the Gatekeeper in a Rack The Gatekeeper may be used as a desktop unit or mounted in a standard 19-inch rack enclosure. When mounting it in a rack, attach it securely with the four mounting screws included in your Gatekeeper kit. Caution: To prevent personal injury or damage to the unit, two people should mount the Gatekeeper into a rack. Note: For proper cooling, the unit must have at least one inch of clearance behind it for air flow.
MultiVOIP Gatekeeper Single Board Computer The SBC has three connectors, as illustrated in Fig. 2. 100M LINK ACT 120 Keyboard Video (DB15) COM1 (DB9) Fig. 2. SBC connectors Network Interface Card 100M LINK ACT 120 100M LINK ACT The 10/100Mb PCI EtherNet network interface card is located as shown in Fig. 3. The NIC has a single RJ-45 UTP connector and three LED indicators. 100M LINK ACT Fig. 3.
Quick Start Guide Power Supply Plug one end of the supplied power cord into the Gatekeeper, and the other end into an AC power source, such as a wall socket, power strip, or UPS. To turn on the system, press the power switch, which is located next to the floppy disk drive.
MultiVOIP Gatekeeper 2 Software Setup Overview Windows NT Server 4.0 and the Gatekeeper software are preinstalled on the Gatekeeper. However, you must set up the network parameters in Windows before the Gatekeeper software can be used. The default version includes a 20-user license for users and a five-user license for administrators.
Quick Start Guide 5. Select the DNS tab, and set up the Gatekeeper for Internet communications. 6. Click OK to save your settings and exit the Microsoft TCP/ IP Properties dialog box. 7. Click OK to exit the Network dialog box. Gatekeeper Software Setup The Gatekeeper software is installed with a default 20-user license file. For additional user licenses, contact Multi-Tech Sales at 888-288-5470 (U.S./Canada) or +763-785-3500.
82099221
