User guide

MultiVOIP FX Cabling Guide
4 Multi-Tech Systems, Inc.
• Ensure that the MultiVOIP is properly connected to earth ground via a
grounded power cord. If a power strip is used, ensure that the power strip
provides adequate grounding of the attached apparatus.
• Ensure that the mains supply circuit is capable of handling the load of the
MultiVOIP. Refer to the power label on the equipment for load requirements.
• Maximum ambient temperature for the MultiVOIP is 60 degrees Celsius
(140° F) at 20-90%s non-condensing relative humidity.
• This equipment should only be installed by properly qualified service
personnel.
• Only connect like circuits. In other words, connect SELV (Secondary Extra
Low Voltage) circuits to SELV circuits and TN (Telecommunications
Network) circuits to TN circuits.
• To reduce the risk of shock, all access doors should be closed during
normal operation of the equipment.
MultiVOIP Package Contents
• One MultiVOIP FX
• One power cord
• One Console Cable (RJ45 to DB25 connectors)
• Two rack mount brackets and four mounting screws for -4 and -8 models
• One printed Cabling Guide.
• One MultiVOIP CD containing software and user documentation.
Cabling the MVPFX2-2
Cabling involves connecting the MultiVOIP to your LAN and telephone equipment.
Power Connection
Voice/Fax Channel 1 - 2
C onne ctio n s
FXS FXO
FXS
PSTN
FXO
FX S FX SFX O FXO
VOICE/ FAX 1 WAN CO NSOLE
10/100 RS-232
VOICE/FAX 2 POWER
RJ-11
Connectors
RJ-45
Cable
Grounding
Cable
Ethernet
Default IP
192.168.2.1
PC IP
192.168.2.X